International Journal of Advanced Sport Sciences Research

ASSR is an open access journal, aims at rapid publication of concise research papers of a broad interest in Physical education fields. Subject areas include all the current fields of interest represented by the Committees of the Design Scientific Renaissance. ASSR welcomes papers and articles in sport and physical education, fields of ASSR includes but not limited to: sport for all; Exercise physiology; Moths of training and coaching;Sport’s performance and analysis

Read More >


Journal of Advanced Computer Science and Technology Research

JACSTR is an open access journal, aims at rapid publication of concise research papers of a broad interest in computer science and information technology fields.

Read More >


Journal of Advanced Laser and Optics Research

JALOR aims at rapid publication of concise research papers of a broad interest in laser and optics fields. Subject areas include all the current fields of interest represented by the Committees of the Design Scientific Renaissance. JALOR accepts papers and articles in fields, including but not limited to the following: Actuator; Detectors; Ferroelectric And Ferromagnetic Materials; Filters; Holography; Laser Accessories And Optics

Read More >


Journal of Advanced Medical Research

Journal of Advanced Medical Research (JAMR) is an open access journal, provides rapid publication of various articles in the fields of Medical, Dentistry, Pharmacy, Comparative Veterinary and Medical sciences, and related disciplines. JAMR seeks to publish experimental and theoretical research results of outstanding significance in the form of original articles, reviews, case reports, short reports, or letters to the editor.

Read More >


Journal of Advanced Science and Engineering Research

JASER is an open access journal, aims at rapid publication of concise research papers of a broad interest in science and engineering fields. Subject areas include all the current fields of interest represented by the Committees of the Design Scientific Renaissance.

Read More >


Journal of Advanced Social Research

JASR is an open access journal, aims at rapid publication of concise research papers of a broad interest in social fields. JASR welcomes papers and articles in social fields, including but not limited to the following: Accounting; Applied Economics; Business Law; Business Management; Economics; Education Read More >

Journal of Purity, Utility Reaction and Environment

JMMR aims at rapid publication of concise research papers of a broad interest in marketing fields. JMMR welcomes papers and articles in marketing fields, including but not limited to the following: Consumer behavior; CRM; Customer Knowledge Management; Advertising economies; Consumer modeling; Marketing research; Interactive marke

Read More >


Journal of Purity, Utility Reaction and Environment

The Journal of Purity, Utility Reaction & ENVIRONMENT focuses upon six aspects of chemical engineering: chemical reaction engineering, environment chemical engineering, and materials synthesis and processing, catalyst surface reaction, optimization and control.

Read More >

Journal of Advanced Computer Science and Technology Research


JACSTR is an open access journal, aims at rapid publication of concise research papers of a broad interest in computer science and information technology fields. Subject areas include all the current fields of interest represented by the Committees of the Design Scientific Renaissance. JACSTR welcomes papers and articles in fields, including but not limited to the following:

    Artificial Intelligence
    Bioinformatics
    Cluster Computing and Performance
    Computer Graphics and Visualization
    Computer Network and Internet
    Cryptography and Security
    Data Warehouse and Applications
    Database and Knowledge-Based Systems
    Dependable Computing
    E-governance
    Grid Computing
    ICT Act and cyber law
    Information Policy Making
    Information Security
    Knowledge Representation Models
    Machine Learning and Data Mining
    Natural Language Processing
    Pattern Recognition and Image Processing
    Software Performance and Evaluation
    Others concerned

 

 

Microsoft Word format may be submitted online to Design for Scientific Renaissance for initial evaluation. For more information on submission process, authors should go to Submission page Style of manuscriptsAuthors should write their manuscripts based on the following format:
  • Use only (Times New Roman) font 12 with 1.15 space for all sections within the article except the Abstract, it should be written in Times new Roman size 11. The article should be written in one column.
  • The Document margins are 1 inch for left, right, top and bottom.
  • Use APA 2011 for references and citations (www.apa.org)
  • Paper title should be in the center, Bold, and size 16 in Arial. The authors name should be written in Arial font and size 14. Addresses and emails of the authors are in Arial font size 11.
  • Do not use boldface typing except for section headings.
  • Do not print page numbers.
  • All manuscripts must be in English.
  • When receiving the manuscript, we assume that the corresponding authors grant us the copyright to use the manuscript for the book or journal in question.
  • The indentation of the first line after the first paragraph should be 0.25 inch for all sections.
  • There should be no space between the paragraphs in the same section, and no spaces between the references.

Subdivision - numbered sections Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to "the text". Any subsection may be given a brief heading. Each heading should appear on its own separate line.

Abstract The abstract should conclude the research paper in (50-300) words. The abstract should state briefly the purpose of the research, the principal results and major conclusions. Write the abstract in Times new Roman, size 11.

Key words Use (3-6) words, these keywords will be used for indexing purposes. The font of the keywords is times new roman, size 11 and Bold.

Introduction State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.

Methodology Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.

Results & Discussion Results should be clear and concise. This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.

Conclusion The main conclusions of the study may be presented in a short Conclusions section, which should stand alone.

Appendices If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1, etc.

Tables Tables (refer with: Table 1, Table 2) should be presented as part of the text. A descriptive title should be placed above each table. The caption should be self-contained and placed below or beside the table. Units in tables should be given in square brackets [cm²]. If square or standard brackets (cm²).

Figures Figures (refer with: Fig. 1, Fig. 2) and should be presented as part of the text, leaving enough space so that the capt¬ion will not be confused with the text. The caption should be self-contained and placed below the figure. Color figures are welcome for the online version of the journal. Generally, these figures will be reduced to black and white for the print version. The author should indicate on the checklist if he wishes to have them printed in full color and make the necessary payments in advance.

Equations Equations (refer with: Eq. 1, Eq. 2. There should be one line of space above the equation and one line of space below it before the text continues. The equations have to be numbered sequentially, and the number put in parentheses at the right-hand edge of the text. Equations should be punctuated as if they were an ordinary part of the text. Punctuation appears after the equation but before the equation number

Literature References References are cited in the text just according to APA (name, year). The references are to be numbered in the alphabetic order and are to be listed at the end of the contribution under a heading References, see our example below.

Summary Please also provide your phone number, fax number and e mail address for rapid communication with the publisher. If you follow the foregoing, your paper will conform to the requirements of the publisher and facilitate a problem-free publication process.

References examples

Al-Ahmari, A. M. A. (2007). Predictive machinability models for a selected hard material in turning operations. Journal of Material Process Technology. 190, 305–311.

Amiolemhen, E., and Ibhadode, A.O.A. (2004). Application of genetic algorithms determination of the optimal machining parameters in the conversion of a cylindrical bar stock into a continuous finished profile, International Journal of Machine Tools and Manufacture 44 (12 – 13), 1403 – 1412.

Astakhov, V. P. (2006). Tripology of metal cutting. Elesiver Ltd. Printed in Great Britain. pp. 425.

Campatelli, G. (2009, July). Analysis of the environmental impact for a turning operation of AISI 1040 steel. Innovative Production Machines and Systems (IPROMS2009) Conference, 6-17. ISO 3685, (1993). Tool life testing with single-point turning tools, International Standard organization, 2nd edition. Geneva, Switzerland

Checklist Before submission of your manuscript, please check that:

• All references cited in the text are included in the reference section.

• All figures and tables are cited in the text.

• Figures are at least 300 d.p.i.

• The pages are numbered.

 

If you need further information on APA format please refer to this Link

If you are interested to submit an article to JACSTR please register in the journal as Author, Login and start the five steps submission process.

Fees and Charges: Authors are required to pay a 200 USD handling fee. Authors may still request (in advance) that the editorial office waive some of the handling fee under special circumstances.

Editorial Board of JACSTR

Editor-In-chief

Prof. Imad F.T. Alshekhly/ Malaysia.

Editors

Prof. Abdul Wahab Abdul Rahman/ Malaysia.
Prof. Ahmed Bouridane/ UK.
Prof. Ahmad Tariq/ Iraq.
Prof. Alaa Hussein Al-hamami/ Jordan.
Prof. Asadullah Shah/ Malaysia.
Prof. Emilia Mendes/ Sweden.
Prof. Hadj Bourdoucen/ Oman
Prof. Hilal M.Y. Al-Bayatti/ Bahrain.
Prof. Ivan Jelinek/ Czech Republic.
Prof. H.V.Sahasrabuddhe/ India.
A.Prof. Abdellatif Kobbane/ Morroco.
A.Prof. Moayad A. Fadhill/ Jordan.
A.Prof. Zeynep Orman/ Turkey.

Dr. Muataz Hazza Faizi/ Malaysia.

 Dr. Ali A. Alwan Al-Juboori

Contact Info

AddressEmailPhone Number

B-2-12, Block B, Megan Avenue II

Jalan Yap Kwan Seng,

50450 Kuala Lumpur, Malaysia.

info[at]sign-ific-ance.co.uk0321818122
is now available.