International Journal of Advanced Sport Sciences Research

ASSR is an open access journal, aims at rapid publication of concise research papers of a broad interest in Physical education fields. Subject areas include all the current fields of interest represented by the Committees of the Design Scientific Renaissance. ASSR welcomes papers and articles in sport and physical education, fields of ASSR includes but not limited to: sport for all; Exercise physiology; Moths of training and coaching;Sport’s performance and analysis

Read More >


Journal of Advanced Computer Science and Technology Research

JACSTR is an open access journal, aims at rapid publication of concise research papers of a broad interest in computer science and information technology fields.

Read More >


Journal of Advanced Laser and Optics Research

JALOR aims at rapid publication of concise research papers of a broad interest in laser and optics fields. Subject areas include all the current fields of interest represented by the Committees of the Design Scientific Renaissance. JALOR accepts papers and articles in fields, including but not limited to the following: Actuator; Detectors; Ferroelectric And Ferromagnetic Materials; Filters; Holography; Laser Accessories And Optics

Read More >


Journal of Advanced Medical Research

Journal of Advanced Medical Research (JAMR) is an open access journal, provides rapid publication of various articles in the fields of Medical, Dentistry, Pharmacy, Comparative Veterinary and Medical sciences, and related disciplines. JAMR seeks to publish experimental and theoretical research results of outstanding significance in the form of original articles, reviews, case reports, short reports, or letters to the editor.

Read More >


Journal of Advanced Science and Engineering Research

JASER is an open access journal, aims at rapid publication of concise research papers of a broad interest in science and engineering fields. Subject areas include all the current fields of interest represented by the Committees of the Design Scientific Renaissance.

Read More >


Journal of Advanced Social Research

JASR is an open access journal, aims at rapid publication of concise research papers of a broad interest in social fields. JASR welcomes papers and articles in social fields, including but not limited to the following: Accounting; Applied Economics; Business Law; Business Management; Economics; Education Read More >

Journal of Purity, Utility Reaction and Environment

JMMR aims at rapid publication of concise research papers of a broad interest in marketing fields. JMMR welcomes papers and articles in marketing fields, including but not limited to the following: Consumer behavior; CRM; Customer Knowledge Management; Advertising economies; Consumer modeling; Marketing research; Interactive marke

Read More >


Journal of Purity, Utility Reaction and Environment

The Journal of Purity, Utility Reaction & ENVIRONMENT focuses upon six aspects of chemical engineering: chemical reaction engineering, environment chemical engineering, and materials synthesis and processing, catalyst surface reaction, optimization and control.

Read More >

International Journal on Islamic Applications in Computer Science And Technology


International Journal on Islamic Applications in Computer Science And Technology- IJASAT

e-ISSN 2289-4012

Background

Information Technology and its applications in different aspects of life have had a significant impact in the service of Islam and Sharia in all its forms, including the service of the Holy Quran, Hadith, Fiqh and other Sharia sciences. This journal aims to provide the most important applications and Software that have contributed in the service of Muslim and his religion, community and family, and aims to encourage scientific research to use IT tools in Sharia sciences. Presenting and evaluation Muslims Contributions in Computer Science Applications and Technology. The journal also serves the Arabic language, Machine Translation, Natural Language Processing for Arabic Language and voice & character recognition for Arabic language.

Topics

- Muslim Contributions in Computer Science Applications and Technology
- IT in the service of the Holy Quran and its Sciences
- IT in the service of the Hadith and the Sunnah
- IT in development of islamic society
- IT in the service of Islamic Jurisprudence and its Sciences
- IT in the service of Islamic History and Civilization
- IT in the service of Islamic knowledge and the role of Muslim Scholars
- IT ethics from islamic point of view
- Islamic Databases
- Computer Applications in the service of the Arabic language and Machine Translation
- Natural Language Processing for Arabic Language

Microsoft Word format may be submitted online to Design for Scientific Renaissance for initial evaluation. For more information on submission process, authors should go to Submission page Style of manuscriptsAuthors should write their manuscripts based on the following format:
  • Use only (Times New Roman) font 12 with 1.15 space for all sections within the article except the Abstract, it should be written in Times new Roman size 11. The article should be written in one column.
  • The Document margins are 1 inch for left, right, top and bottom.
  • Use APA 2011 for references and citations (www.apa.org)
  • Paper title should be in the center, Bold, and size 16 in Arial. The authors name should be written in Arial font and size 14. Addresses and emails of the authors are in Arial font size 11.
  • Do not use boldface typing except for section headings.
  • Do not print page numbers.
  • All manuscripts must be in English.
  • When receiving the manuscript, we assume that the corresponding authors grant us the copyright to use the manuscript for the book or journal in question.
  • The indentation of the first line after the first paragraph should be 0.25 inch for all sections.
  • There should be no space between the paragraphs in the same section, and no spaces between the references.

Cover Letter All manuscripts should be submitted with a pre-defined cover letter. Authors may download a sample cover letter by clicking here.

Subdivision - numbered sections Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1 (then 1.1.1, 1.1.2, ...), 1.2, etc. (the abstract is not included in section numbering). Use this numbering also for internal cross-referencing: do not just refer to "the text". Any subsection may be given a brief heading. Each heading should appear on its own separate line.

Abstract The abstract should conclude the research paper in (50-300) words. The abstract should state briefly the purpose of the research, the principal results and major conclusions. Write the abstract in Times new Roman, size 11.

Key words Use (3-6) words, these keywords will be used for indexing purposes. The font of the keywords is times new roman, size 11 and Bold.

Introduction State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.

Methodology Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.

Results & Discussion Results should be clear and concise. This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.

Conclusion The main conclusions of the study may be presented in a short Conclusions section, which should stand alone.

Appendices If there is more than one appendix, they should be identified as A, B, etc. Formulae and equations in appendices should be given separate numbering: Eq. (A.1), Eq. (A.2), etc.; in a subsequent appendix, Eq. (B.1) and so on. Similarly for tables and figures: Table A.1; Fig. A.1, etc.

Tables Tables (refer with: Table 1, Table 2) should be presented as part of the text. A descriptive title should be placed above each table. The caption should be self-contained and placed below or beside the table. Units in tables should be given in square brackets [cm²]. If square or standard brackets (cm²).

Figures Figures (refer with: Fig. 1, Fig. 2) and should be presented as part of the text, leaving enough space so that the capt¬ion will not be confused with the text. The caption should be self-contained and placed below the figure. Color figures are welcome for the online version of the journal. Generally, these figures will be reduced to black and white for the print version. The author should indicate on the checklist if he wishes to have them printed in full color and make the necessary payments in advance.

Equations Equations (refer with: Eq. 1, Eq. 2. There should be one line of space above the equation and one line of space below it before the text continues. The equations have to be numbered sequentially, and the number put in parentheses at the right-hand edge of the text. Equations should be punctuated as if they were an ordinary part of the text. Punctuation appears after the equation but before the equation number

Literature References References are cited in the text just according to APA (name, year). The references are to be numbered in the alphabetic order and are to be listed at the end of the contribution under a heading References, see our example below.

Summary Please also provide your phone number, fax number and e mail address for rapid communication with the publisher. If you follow the foregoing, your paper will conform to the requirements of the publisher and facilitate a problem-free publication process.

References examples

Al-Ahmari, A. M. A. (2007). Predictive machinability models for a selected hard material in turning operations. Journal of Material Process Technology. 190, 305–311.

Amiolemhen, E., and Ibhadode, A.O.A. (2004). Application of genetic algorithms determination of the optimal machining parameters in the conversion of a cylindrical bar stock into a continuous finished profile, International Journal of Machine Tools and Manufacture 44 (12 – 13), 1403 – 1412.

Astakhov, V. P. (2006). Tripology of metal cutting. Elesiver Ltd. Printed in Great Britain. pp. 425.

Campatelli, G. (2009, July). Analysis of the environmental impact for a turning operation of AISI 1040 steel. Innovative Production Machines and Systems (IPROMS2009) Conference, 6-17. ISO 3685, (1993). Tool life testing with single-point turning tools, International Standard organization, 2nd edition. Geneva, Switzerland

Checklist Before submission of your manuscript, please check that:

• All references cited in the text are included in the reference section.

• All figures and tables are cited in the text.

• Figures are at least 300 d.p.i.

• The pages are numbered.

If you are interested to submit an article to IJASAT please register in the journal as Author, Login and start the five steps submission process.

or send your article to

submission_ijasat@sign-ific-ance.co.uk

 

 

Editor-In-chief
Prof. Dr. Mohammed Zeki Khedher, Jordan University, Jordan
 
Advisors
- Prof. Dr. Zaghloul al-Najjar, The World Islamic Science and Education University, Jordan
- Prof. Dr. Hany Ammar, West Virginia University, USA
 
Managing Editor
- Dr. Akram M. Zeki, International Islamic University Malaysia, Malaysia
 
Assistant Editor
- Mustafa Ali Abuzaraida, Misurata University, Libya
 
Editors
- Prof. Dr. Abdeslam JAKIMI, Moulay Ismail University, Meknes, Morocco
- Prof. Dr. Adnan Abdul-Aziz Gutub, Umm Al-Qura University, Makkah, Saudi Arabia
- Prof. Dr. Ahmed Ferchichi, University of Tunisia, Tunisia
- Prof. Teddy Montoro, Universitas Siswa Bangsa International, Indonesia.
- Dr. AbdulSattar M. khidhir, Mosul Technical Institute, Iraq
- Dr. Ibrahim Suliman Ahmed Ashmaiq , International Islamic University Malaysia, Malaysia
- Dr. Jamil Itmazi, Palestine Ahliya University, Palestine
- Dr. Marzanah A. Jabar, Universiti Putra Malaysia, Malaysia
- Dr. Nor Hasbiah Ubaidullah, Sultan Idris Education University, Malaysia
- Dr. Omar Tayan, Taibah University, Saudi Arabia
- Dr. Rashid A. Saeed, Sudan University of Science and Technology (SUST), Khartoum, Sudan
- Dr. Youssef Zaz, Abdelmalek Essaadi University, Morocco

To submit your article, please send to

submission_ijasat@sign-ific-ance.co.uk

 

For more information please send to

ijasat@sign-ific-ance.co.uk

Announcements

 
No announcements have been published.
 
More Announcements...